53 lines
2.0 KiB
C
53 lines
2.0 KiB
C
#ifndef AIR780E_H
|
|
#define AIR780E_H
|
|
|
|
#include "main.h"
|
|
#include <stdint.h>
|
|
|
|
/*===== 4G 模组引脚定义 (Air780E 复位控制, 低电平有效) =====*/
|
|
#define CAT_RST_PIN GPIO_PIN_4
|
|
#define CAT_RST_PORT GPIOA
|
|
|
|
#define CAT_RST_LOW() HAL_GPIO_WritePin(CAT_RST_PORT, CAT_RST_PIN, GPIO_PIN_RESET)
|
|
#define CAT_RST_HIGH() HAL_GPIO_WritePin(CAT_RST_PORT, CAT_RST_PIN, GPIO_PIN_SET)
|
|
|
|
#define CAT_RST_LOW_MS 4000 /* 拉低 4s 硬件复位 */
|
|
|
|
/*===== MQTT 服务器配置 =====*/
|
|
typedef struct {
|
|
char ClientID[20];
|
|
char Username[20];
|
|
char Passward[20];
|
|
char ServerIP[20];
|
|
uint16_t ServerPort;
|
|
char Topic[20];
|
|
} MqttConfig;
|
|
|
|
/* 默认 MQTT 参数已迁移到 main.h 的 MQTT_xxx 宏，避免多处维护不一致 */
|
|
|
|
/*===== U2_CopyBuff =====*/
|
|
#define U2_COPY_SIZE 20480
|
|
extern uint8_t U2_CopyBuff[U2_COPY_SIZE];
|
|
extern volatile uint16_t U2_CopyIndex;
|
|
extern volatile uint8_t U2_CopyFlag;
|
|
|
|
/*===== 运行状态标志 (供 main.c 判断 OTA 业务健康) =====*/
|
|
extern volatile uint8_t g_air780e_mqtt_ready;
|
|
extern volatile uint8_t g_air780e_first_publish_ok;
|
|
|
|
/*===== API =====*/
|
|
uint8_t catSendCmd(const char *cmd, const char *expect, uint8_t retry, uint8_t timeout);
|
|
int air780e_send_at(const char *cmd, const char *expect, int timeout_ms);
|
|
void bg_delay(uint32_t ms); /* 后台切片延时(喂狗+业务轮询), WiFi 后端 AT 等待同样复用 */
|
|
int Verify_Firmware_External(uint32_t ext_addr, uint32_t size); /* 外部Flash固件头校验, WiFi OTA 复用 */
|
|
uint16_t crc16_modbus_update(uint16_t crc, uint8_t data); /* MODBUS CRC16 累加, WiFi OTA 复用 */
|
|
void air780e_init(void);
|
|
void air780e_process(void);
|
|
void air780e_trigger_ota(const char *host, int port, const char *path, const char *ota_id, uint16_t new_ver, uint16_t crc16);
|
|
void air780e_mqtt_report(const char *header, const char *ota_id, int percent_or_success);
|
|
void air780e_ota_confirm(void);
|
|
uint16_t ota_get_version(void);
|
|
void CAT1_printf(const char *fmt, ...);
|
|
|
|
#endif /* AIR780E_H */
|