129 lines
4.7 KiB
C
129 lines
4.7 KiB
C
/* user_cmd.c - 蓝牙串口调试命令处理
|
||
*
|
||
* 通过 USART1 接收简单文本命令，用于现场调试:
|
||
* RESET/OTA - 复位整机
|
||
* RECOVERY - WiFi模块 AT+RESTORE 忘掉已存热点(测试SmartConfig) + 复位
|
||
* INFO - 打印 MQTT 配置信息
|
||
* STATUS - 打印继电器状态
|
||
* R1ON ~ R4OFF - 单路继电器开关
|
||
* ALLON / ALLOFF - 全部继电器开关
|
||
* HELP - 显示支持命令
|
||
*/
|
||
|
||
#include "user_cmd.h"
|
||
#include "ble_at.h"
|
||
#include "app_common.h"
|
||
#include "relay.h"
|
||
#include "24c02.h"
|
||
#include "uart.h"
|
||
#include "log.h"
|
||
#include "network.h"
|
||
#include "net_wifi.h"
|
||
#include "esp8266.h"
|
||
#include "reset_log.h"
|
||
|
||
/* 本地命令字符串不区分大小写比较 */
|
||
static int cmd_is(const char *a, const char *b)
|
||
{
|
||
while (*a && *b) {
|
||
char ca = *a, cb = *b;
|
||
if (ca >= 'A' && ca <= 'Z') ca += 'a' - 'A';
|
||
if (cb >= 'A' && cb <= 'Z') cb += 'a' - 'A';
|
||
if (ca != cb) return 0;
|
||
a++; b++;
|
||
}
|
||
return (*a == 0 && *b == 0);
|
||
}
|
||
|
||
/* 通过蓝牙串口直接控制单个继电器，并保存/上报状态 */
|
||
static void relay_set(uint8_t ch, uint8_t on)
|
||
{
|
||
if (ch < 1 || ch > 4) return;
|
||
|
||
relaySet(ch, on);
|
||
log_info("> BT: SW%d %s", ch, on ? "开" : "关");
|
||
eepromWriteData(102, &MqttInfoStr.Relay_State[0], 7);
|
||
relayRequestReport();
|
||
}
|
||
|
||
void userCmdInit(void)
|
||
{
|
||
/* 无需额外初始化 */
|
||
}
|
||
|
||
/* 处理 USART1 蓝牙调试命令 */
|
||
void process_usart1_command(void)
|
||
{
|
||
const char *cmd = USART1_GetCommand();
|
||
if (!cmd) return;
|
||
|
||
if (cmd_is(cmd, "RESET")) {
|
||
log_warn("> USART1: 收到 RESET 命令，正在重启...");
|
||
reset_log_mark(RSN_CMD_RESET);
|
||
HAL_Delay(100);
|
||
NVIC_SystemReset();
|
||
}
|
||
else if (cmd_is(cmd, "INFO")) {
|
||
log_info("> BT INFO: 版本=%u, 服务器=%s:%d, 客户端=%s",
|
||
MqttInfoStr.Ver, MqttInfoStr.ServerIP,
|
||
MqttInfoStr.ServerPort, MqttInfoStr.ClientID);
|
||
}
|
||
else if (cmd_is(cmd, "R1ON")) { relay_set(1, 1); }
|
||
else if (cmd_is(cmd, "R1OFF")) { relay_set(1, 0); }
|
||
else if (cmd_is(cmd, "R2ON")) { relay_set(2, 1); }
|
||
else if (cmd_is(cmd, "R2OFF")) { relay_set(2, 0); }
|
||
else if (cmd_is(cmd, "R3ON")) { relay_set(3, 1); }
|
||
else if (cmd_is(cmd, "R3OFF")) { relay_set(3, 0); }
|
||
else if (cmd_is(cmd, "R4ON")) { relay_set(4, 1); }
|
||
else if (cmd_is(cmd, "R4OFF")) { relay_set(4, 0); }
|
||
else if (cmd_is(cmd, "ALLON")) {
|
||
relay_set(1, 1); relay_set(2, 1); relay_set(3, 1); relay_set(4, 1);
|
||
}
|
||
else if (cmd_is(cmd, "ALLOFF")) {
|
||
relay_set(1, 0); relay_set(2, 0); relay_set(3, 0); relay_set(4, 0);
|
||
}
|
||
else if (cmd_is(cmd, "STATUS")) {
|
||
log_info("> BT STATUS: SW1=%s, SW2=%s, SW3=%s, SW4=%s",
|
||
MqttInfoStr.Relay_State[1] ? "开" : "关",
|
||
MqttInfoStr.Relay_State[2] ? "开" : "关",
|
||
MqttInfoStr.Relay_State[3] ? "开" : "关",
|
||
MqttInfoStr.Relay_State[4] ? "开" : "关");
|
||
}
|
||
else if (cmd_is(cmd, "OTA")) {
|
||
log_info("> BT OTA: 重启进入 BootLoader 检查升级");
|
||
reset_log_mark(RSN_CMD_OTA);
|
||
HAL_Delay(100);
|
||
NVIC_SystemReset();
|
||
}
|
||
else if (cmd_is(cmd, "RECOVERY")) {
|
||
/* WiFi 模块 AT+RESTORE 恢复出厂（忘掉已保存的热点），用于测试 SmartConfig；
|
||
* 仅 WiFi 通道激活时才操作模块（UART4 与 4G 共享接收缓冲，
|
||
* 4G 模式下动 UART4 会干扰 4G 数据），随后整机复位走完整重连流程 */
|
||
if (NET_GetActiveBackend() == NET_BACKEND_WIFI) {
|
||
log_warn("> BT RECOVERY: 已安排 WiFi 恢复出厂设置"); g_wifi_restore_req = 1;
|
||
} else {
|
||
log_warn("> BT RECOVERY: 4G 模式，不操作 WiFi 模块，仅重启");
|
||
reset_log_mark(RSN_CMD_RECOVERY);
|
||
HAL_Delay(100);
|
||
NVIC_SystemReset();
|
||
}
|
||
}
|
||
else if (cmd_is(cmd, "BLESET")) {
|
||
log_info("> BT: 强制重新设置蓝牙名称/UUID");
|
||
ble_force_setup();
|
||
}
|
||
else if (cmd_is(cmd, "LOG_TRACE")) { log_set_level(LOG_TRACE); log_info("> BT: 日志等级 TRACE"); }
|
||
else if (cmd_is(cmd, "LOG_DEBUG")) { log_set_level(LOG_DEBUG); log_info("> BT: 日志等级 DEBUG"); }
|
||
else if (cmd_is(cmd, "LOG_INFO")) { log_set_level(LOG_INFO); log_info("> BT: 日志等级 INFO"); }
|
||
else if (cmd_is(cmd, "LOG_WARN")) { log_set_level(LOG_WARN); log_info("> BT: 日志等级 WARN"); }
|
||
else if (cmd_is(cmd, "LOG_ERROR")) { log_set_level(LOG_ERROR); log_info("> BT: 日志等级 ERROR"); }
|
||
else if (cmd_is(cmd, "LOG_FATAL")) { log_set_level(LOG_FATAL); log_info("> BT: 日志等级 FATAL"); }
|
||
else if (cmd_is(cmd, "LOG")) { log_info("> BT: 当前日志等级 %d", (int)log_get_level()); }
|
||
else if (cmd_is(cmd, "HELP")) {
|
||
log_info("CMD: RESET, INFO, STATUS, R1ON/R1OFF~R4ON/R4OFF, ALLON, ALLOFF, OTA, RECOVERY, HELP");
|
||
}
|
||
else {
|
||
log_warn("> BT: 未知命令 %s", cmd);
|
||
}
|
||
}
|